香港VPS CentOS8 Stream 网卡配置操作

已关闭留言

香港VPS的CentOS8 已废弃network.service，网卡操作需要使用nmcli ，当前整理配置文件操作及相关命令

命令：nmcli

配置文件：/etc/sysconfig/network-scripts/ifcfg-eth0

配置单个ipv4地址

  • IP:60.247.159.221 掩码：255.255.255.0 网关：60.247.159.1

  • [root@ebs-113436 ~]# vim /etc/sysconfig/network-scripts/ifcfg-eth0# 申明网卡eth0DEVICE=eth0BOOTPROTO=staticIPADDR=60.247.159.221NETMASK=255.255.255.0GATEWAY=60.247.159.1TYPE=EthernetONBOOT=yes

配置多个ipv4地址

  • IP1:60.247.159.221 掩码1：255.255.255.0 网关1：60.247.159.152

  • IP2:60.247.159.221 掩码2：255.255.255.0

    多ip配置一般只需要配置一个GATEWAY0 网关即可

  • [root@ebs-113436 ~]# vim /etc/sysconfig/network-scripts/ifcfg-eth0# 申明网卡eth0DEVICE=eth0BOOTPROTO=staticTYPE=EthernetONBOOT=yesIPADDR0=60.247.159.221IPADDR1=60.247.159.152NETMASK0=255.255.255.0NETMASK1=255.255.255.0……GATEWAY0=60.247.159.1

几个依此添加即可，如果ip较多，一个IP段添加。

先通过http://tool.520101.com/wangluo/ipjisuan/ 计算ip地址

香港VPS CentOS8 Stream 网卡配置操作插图

获取到第一个和最后一个可用ip尾数为193和254，以及掩码255.255.255.192，并注意服务器上网络连接名称，加入

for I in $(seq 193 254); do nmcli con mod eth0 +ipv4.addresses 192.168.1.${I}/26; done

单个ipv6配置

  • ipv4：60.247.159.221 掩码：255.255.255.0 网关：60.247.159.1

  • ipv6：240E:D9:C200:160:9404::1A80 掩码位数：64 网关：240e:d9:c200:160::1

[root@ebs-113436 ~]# vim /etc/sysconfig/network-scripts/ifcfg-eth0
# 申明网卡eth0 DEVICE=eth0 BOOTPROTO=static IPADDR=60.247.159.221 NETMASK=255.255.255.0 GATEWAY=60.247.159.1 TYPE=Ethernet ONBOOT=yes IPV6INIT=yes IPV6_AUTOCONF=yes IPV6_DEFROUTE=yes IPV6ADDR=240E:D9:C200:160:9404::1A80/64 IPV6_DEFAULTGW=240e:d9:c200:160::1

多个ipv6配置

  • ipv4：60.247.159.221 掩码：255.255.255.0 网关：60.247.159.1

  • ipv6：240E:D9:C200:160:9404::1A80-240E:D9:C200:160:9404::1a9f 掩码位数：64 网关：240e:d9:c200:160::1

  • [root@ebs-113436 ~]# vim /etc/sysconfig/network-scripts/ifcfg-eth0# 申明网卡eth0DEVICE=eth0BOOTPROTO=staticIPADDR=60.247.159.221NETMASK=255.255.255.0GATEWAY=60.247.159.1TYPE=EthernetONBOOT=yes# IPV6配置IPV6INIT=yesIPV6_AUTOCONF=yesIPV6_DEFROUTE=yesIPV6ADDR=240E:D9:C200:160:9404::1A80/64IPV6_DEFAULTGW=240e:d9:c200:160::1# 多IPV6配置 用空格分开IPV6ADDR_SECONDARIES=”240E:D9:C200:160:9404::1a80/64 240E:D9:C200:160:9404::1a81/64 240E:D9:C200:160:9404::1a82/64 240E:D9:C200:160:9404::1a83/64 240E:D9:C200:160:9404::1a84/64 240E:D9:C200:160:9404::1a85/64 240E:D9:C200:160:9404::1a86/64 240E:D9:C200:160:9404::1a87/64 240E:D9:C200:160:9404::1a88/64 240E:D9:C200:160:9404::1a89/64 240E:D9:C200:160:9404::1a8a/64 240E:D9:C200:160:9404::1a8b/64 240E:D9:C200:160:9404::1a8c/64 240E:D9:C200:160:9404::1a8d/64 240E:D9:C200:160:9404::1a8e/64 240E:D9:C200:160:9404::1a8f/64 240E:D9:C200:160:9404::1a90/64 240E:D9:C200:160:9404::1a91/64 240E:D9:C200:160:9404::1a92/64 240E:D9:C200:160:9404::1a93/64 240E:D9:C200:160:9404::1a94/64 240E:D9:C200:160:9404::1a95/64 240E:D9:C200:160:9404::1a96/64 240E:D9:C200:160:9404::1a97/64 240E:D9:C200:160:9404::1a98/64 240E:D9:C200:160:9404::1a99/64 240E:D9:C200:160:9404::1a9a/64 240E:D9:C200:160:9404::1a9b/64 240E:D9:C200:160:9404::1a9c/64 240E:D9:C200:160:9404::1a9d/64 240E:D9:C200:160:9404::1a9e/64 240E:D9:C200:160:9404::1a9f/64″

以上配置后需要重启网卡生效；

网卡服务重启

# 查看网卡名称 [root@ebs-113436 ~]# nmcli c NAME UUID TYPE DEVICE System eth0 5fb06bd0-0bb0-7ffb-45f1-d6edd65f3e03 ethernet eth0 System eth1 9c92fad9-6ecb-3e6c-eb4d-8a47c6f50c04 ethernet eth1 # 重启网卡服务 [root@ebs-113436 ~]# nmcli c reload “System eth0” / nmcli c up “System eth0” # 如果不生效 [root@ebs-113436 ~]# nmcli device reapply eth0 [root@ebs-113436 ~]# nmcli device connect eth0